The standard machine FLADDER 300/GYRO with a working width of 1300 mm is used for the top-bottom machine.
Or – to be precise - two of them: One normal machine (1) to do the top side and a machine (2) which, – turned upside down – is doing the bottom side.
The machine is built to cope with the customers variety of workpieces.
There are big and small work pieces with different shapes.
A very powerful vacuum system is used to hold the workpieces during the deburring process.
The transfer from machine 1 to machine 2 happens smoothly due to electronically synchronized speed of the conveyor belts.
Fladder Danmark has of course implemented its well known deburring technique with a rotating and oscillating gear head equipped with 6 counter rotating spindles.
It secures a uniform deburring of all edges because they are being brushed from different angles a numerous number of times.
It also means uniform wear of the tools.
The gear head is mounted with the lock-itTM spindles, which offers quick change of the tools and a centering that minimize the vibrations from the tools during the operation.
Can be integrated in automatic lines
As the new machine has the same technical specifications as the FLADDER 300/GYRO, it is possible to integrate it in an automatic line with i.e. laser- or punching machine, deburring, palletizing and bending.
Simple to operate.
The functions of both machine 1 and 2 are handled from one central control panel.
The major part of the control is done using the touchscreen.
