The purpose of the machine is to deburr 3 dimensional machined work pieces i.e. machined aircraft parts.
It is a deburring process that mostly is done manually.
Due to the flexible FLADDER® abrasive cylinders it is possible to do this deburring automatically.
The most powerful deburring machine in our program FLADDER® 400/GYRO is used.
This machine is developed for very long 3-dimensional parts with table segments on which the workpieces are fixated mechanically.
The machine frame with gearhead are moving on floor rails over the tables. As the parts are placed on individual table segments, there will be easy access to the parts for inspection and loading of parts.
.The processtime and handling is reduced significantly.
Powerful gearhead
The machine is equipped with a robust, powerful gear head mounted with 6 cone spindles on which different kind of abrasive brushes can be used.
The spindles are in pairs counter rotating while the complete gearhead is performing an oscillating and rotating movement over the surface of the work piece.
This ensures a sufficient finishing and deburring of edges on the workpieces.
It is possible to operate the machine either manually or by using the programs entered. The setting for the programs are normally found by intensive tests in cooperation with the customer.